Embossed TPU Badge & Label Selector
This selector narrows custom label printing and custom product labels down to the one build that fits your garment: embossed TPU transfer labels made with HF craft, a heat-fused relief logo and a heat-press application. Tell us the fabric, the wash cycle and the destination market, and the modules below return a shortlist — with every figure that is not fixed today marked confirm per project.

Pick the build by the garment you are making
Four scenarios cover most garment labeling briefs. Each one names the recommended build, the reason in plain language and the single decision you should settle before sampling.
Stretch knit & performance jersey
The build is a thin, flexible TPU film, so it heat-presses directly onto knit panels without additional adhesives or a stitching step. Confirm the press temperature your fabric mill recommends before you commit panels.
Buyer decisionHeat-applied transfer versus a sewn-on badge — transfers keep the panel flat and stitch-free. See the TPU transfer buildWoven shirting & corporate uniform
Uniform and licensed programs use this label precisely because it removes bulky attachments: the branding sits against the cloth as a low-profile embossed logo instead of a patch with a visible border.
Buyer decisionLogo size and placement relative to the chest or sleeve seam — confirm per project against your pattern. Review the embossed logo detailOuterwear shells & upscale fashion
An embossed logo created by heat fusion reads as a subtle raised relief rather than printed ink, which suits upscale fashion lines that want branding to feel like part of the fabric.
Buyer decisionRelief depth and surface finish — confirm per project once we see your shell fabric and artwork. Check relief and finish optionsFootwear & promotional programs
Production scales from small-batch custom printing through to larger order volumes on the same construction, so a trial run and a roll-out do not need two different labels.
Buyer decisionQuantity, finished size and schedule — confirm per project before the pilot run is booked. Start a small-batch sampleConstruction comparison matrix
Raw attributes only, no verdict. The embossed TPU transfer column is the build documented on the product page; anything outside that build is set per order.
| Attribute | Embossed TPU transfer | Silicone badge | PVC patch | Printed transfer film |
|---|---|---|---|---|
| Material | Thermoplastic polyurethane (TPU) | Confirm per project | Confirm per project | Confirm per project |
| Hand-feel | Thin and flexible; applies directly without extra adhesive or stitching | Confirm per project | Confirm per project | Confirm per project |
| Relief / emboss | Raised logo formed by HF craft and heat fusion | Confirm per project | Confirm per project | Confirm per project |
| Wash durability | Designed for regular machine washing without fading or peeling; colorfastness tested | Confirm per project | Confirm per project | Confirm per project |
| Compliance | Raw materials meet the latest EURO Reach standards as of 2023 | Confirm per project | Confirm per project | Confirm per project |
| Application method | Heat transfer; works with automated silicone heat transfer systems and TPU transfer equipment | Confirm per project | Confirm per project | Confirm per project |
| Best end-use | Upscale fashion, promotional apparel, corporate uniforms and licensed branding where bulky attachments are unwanted | Confirm per project | Confirm per project | Confirm per project |
How to read “confirm per project”: the documented build fixes the attributes shown in the highlighted column. Thickness, finished dimensions, relief depth, quantity, lead time and price are not fixed on the page — they are agreed against your artwork, fabric and destination market before production.
Craft & effect glossary
Five terms decide how a label reads on the shelf. Each entry describes what you will see and feel, not the machinery behind it.
HF craft
High-frequency energy shapes the TPU so the label edge and the raised logo are formed in the material itself rather than added on top.
Embossed logo
The logo stands proud of the surface as a heat-fused detail, which is why it holds clarity through washing without a stitched border.
Heat transfer
The label bonds to the garment under a heat press. There is no adhesive layer to add and no sewing step, so the panel stays clean.
3D relief
How far the logo rises above the patch face. Confirm per project, because the relief your artwork can carry depends on line weight and patch size.
Surface finish
Matte or gloss changes how the patch reacts to light. Confirm per project against your color reference before the sample is approved.
What the featured label actually specifies
Item TPU-5# is the documented embossed TPU transfer label behind the recommendation above. These are the attributes that are fixed today.
Embossed TPU Patch — Custom Label Printing & Transfer
- Item No.TPU-5#
- MaterialTPU (thermoplastic polyurethane)
- CraftHF craft with an embossed logo formed by heat fusion
- ApplicationHeat transfer, applied directly with a heat press — no additional adhesive or stitching
- ComplianceRaw materials meet the latest EURO Reach standards; conforms to EURO Reach as of 2023
- WashDesigned for standard washing cycles; regular machine washing without fading or peeling
- CustomizationLogo and colors as per artwork; finished size set per request
- EquipmentCompatible with automated silicone heat transfer systems and TPU transfer equipment
- On requestThickness, exact dimensions, quantities, lead time and price — confirm per project

Compliance and wash performance
The two questions that stall a label approval are chemistry and laundry. Both are answered on the product page, and both belong in the sample stage rather than after the bulk order.
- Chemistry: the raw materials meet the latest EURO Reach standards, and the product conforms to EURO Reach compliance as of 2023.
- Laundry: labels are designed to endure regular machine washing without fading or peeling, and colorfastness tests confirm resistance to fading.
- Your market: if your destination market asks for paperwork beyond this, raise it with the artwork so it is handled in the same conversation.
A wash test on your own fabric is the fairest check. Send a fabric swatch with the brief and use the sample run — confirm per project — to validate before production.
Press compatibility and production scale
Choosing the material is half of the decision; the other half is whether your line and your quantities can run it.
- Equipment: the label is compatible with automated silicone heat transfer systems and TPU transfer equipment, so existing transfer setups can usually take it.
- Scale: production supports scalable volume, from small batch custom printing up to larger order runs, on the same construction.
- Platen setting: press settings, dwell and placement jigs are agreed per garment — confirm per project when you send the fabric.
Buyer decision: if your line runs silicone transfers today, ask for a press trial on your own fabric before you commit to a full run.

Send the six things a quote needs
Artwork, fabric and quantity are what turn a shortlist into a sample. Include all six and the reply comes back with a size, a schedule and a price instead of another round of questions.
Logo artwork
Vector artwork, or a clean file with the line weights visible, so the embossed relief can be judged before sampling.
Fabric swatch
The actual shell you will press onto — knit, woven or coated — so the heat-press behaviour is tested on the right surface.
Finished size
Width and height of the label once applied. Size is customizable; the exact figure is confirmed per project.
Color reference
A Pantone reference or a physical sample. Colors are matched as per artwork, and finish is agreed at the same time.
Destination market
The country the goods ship to, so compliance can be aligned with the EURO Reach 2023 position on this build.
Quantity and date
Pilot quantity plus the roll-out forecast and the date you need it — quantities and lead time are confirmed per project.
Custom logo, color and size are supported on this build; bulk and repeat orders are quoted against your artwork.
Related Products
Keep adjacent product options together for a faster catalog comparison.
TPU Heat Transfer Labels - Custom Label Printing
With a durable embossed finish, our TPU transfer solutions provide precise branding. We are a label manufacturer offering REACH-compliant custom label printing for bulk industrial garment production.
View product →
Customized Heat Transfer TPU Labels Embossed Logo Brand Patch Print Badge For Garment
Manufacturer of TPU transfer labels featuring flexible TPU material and custom logo embossing with factory direct service and OEM options.
View product →
Customized Heat Transfer TPU Labels Embossed Logo Brand Patch Print Badge For Garment
Manufacturer of TPU transfer labels with flexible TPU material, offering custom logo printing and factory direct wholesale service.
View product →Related Reading
Three notes to help clarify product requirements before contacting the supplier.
High Frequency Embossing in 3D TPU Patch Production Lines
High frequency embossing builds a raised TPU logo by heating the film inside an engraved mold and holding it under pressure until it cools.
Read article →Flexible TPU Patches Compared with Silicone and PVC Badges in Apparel
TPU, silicone, and PVC soft badges can carry the same logo but behave very differently once a garment stretches, moves, and sits against skin all day.
Read article →Turning Logo Artwork into Embossed TPU Patches for Apparel
Converting logo artwork into an embossed printed TPU patch starts with a production-ready vector file and a clear specification for line weight, color separation, relief, backing, size, and placement.
Read article →Frequently Asked Questions
what is this label made of, and how is it applied?
it is made from thermoplastic polyurethane (tpu) using hf craft, and the branding is an embossed logo created by heat fusion. it is applied by heat transfer, so the label bonds directly to the fabric without additional adhesive or stitching.
will the label survive machine washing?
the labels are designed to endure regular machine washing without fading or peeling, and colorfastness tests confirm resistance to fading. a wash trial on your own fabric is still the fair test before a bulk run.
does the material meet reach requirements?
yes. the raw materials meet the latest euro reach standards and the product conforms to euro reach compliance as of 2023. mention your destination market with the artwork so the paperwork is aligned from the start.
can i customize the logo, color and size?
yes — logo and colors are produced as per artwork, and the finished size is set per request. thickness, exact dimensions and any fixed color range are confirmed per project before the sample is approved.
which heat-press equipment works with it?
the label is compatible with automated silicone heat transfer systems and tpu transfer equipment. press settings and placement are agreed per garment, so confirm per project when you send your fabric swatch.
what should i send with my quote request?
send logo artwork, a fabric swatch, the finished size, a color reference, your destination market, and the quantity plus target date. quantity, lead time and price are then confirmed per project — start on the contact us page.

