A heat transfer TPU label is a thin, flexible branding badge that is bonded to a garment with heat and pressure instead of being sewn in. The body is thermoplastic polyurethane formed in a high-frequency moulding step, so the logo stands proud of the surface rather than sitting flat on a woven strip. Garment makers reach for it where a sewn patch would add bulk, a stitch line, or an extra operation at the machine.
Every label is built from the file you send: your logo, your typeface, your colour references, your outline. What comes back is a badge-like mark for a chest, sleeve, hem or back panel that reads as part of the design rather than a trim afterthought. T-shirts, hoodies, jackets, backpacks and uniform programmes are its usual homes, and a brand can carry the same mark across a whole seasonal range without redrawing it each time.
Because the badge goes on at the press, custom label printing runs are planned around your production calendar rather than around a sewing station, and the mark itself can be changed between drops without touching the garment pattern.
- Raised 3D logo: the mark is moulded proud of the surface, so it casts a soft shadow and can be felt with a fingertip — depth a flat print cannot produce. - Bonded in one press cycle: the badge is applied at the press instead of at a sewing station, which shortens the path from cut panel to packed garment. - Holds through the laundry: the TPU and its adhesive base are chosen for resistance to washing and abrasion, so the logo keeps its clarity over the life of the garment. - Moves with the fabric: the badge stays soft and flexible, so it does not stiffen the panel or block breathability. - Runs on the press you already have: silicone heat transfer labels and these TPU patches are applied on the same high-frequency equipment, so machinery and operator routine carry straight over. - Held to the approved sample: colour and dimension are fixed at approval, which is why custom garment labels from the first carton to the last read the same on the shelf. - Volume without drift: wholesale label printing schedules are produced against that same approved sample, so a capsule drop and a full-season run follow one standard. - Relief and print together: embossed areas and flat printed colour can share one badge, so custom printed labels and 3D marks do not have to come from two suppliers.
Every part of this label is TPU. Thermoplastic polyurethane gives the badge a soft, rubber-like hand, clean edges on fine lettering, and enough elasticity to move with a knit rather than sitting on it like a stiff plate. It takes a firm bond on a wide range of textiles and returns to shape after the garment has been stretched and washed. The raised logo is formed in a high-frequency moulding step and finished one of three ways. Embossing lifts the mark out of the surface for a 3D effect that catches light at an angle. Engraving cuts the detail in for a recessed, more graphic look. Printing lays colour flat where a multi-colour graphic or a fine strapline has to stay crisp. Relief depth is kept moderate on purpose: deep enough to read clearly across a room, shallow enough that the badge does not press into the chest when the garment is worn. The adhesive base is part of the build, not an add-on. As a custom label manufacturer we keep the mould, the colour mix and the cutting under one roof, which is what lets dimension accuracy and colour matching be controlled to your artwork rather than to the nearest available shade.

| Fabric or substrate | What to expect |
| Cotton jersey and single jersey | Smooth, absorbent surface that takes a heat transfer bond cleanly |
| Cotton fleece and hoodie loops | Loops compress under the press; check the relief still stands after cooling |
| Polyester and poly blends | Heat-sensitive, so confirm the press setting on the actual shell before the run |
| Nylon outerwear | Bonds well where the surface is uncoated and dry |
| Coated or water-repellent shells | The coating can work against the adhesive; test before committing to a placement |
| Stretch knits and elastane blends | The TPU flexes with the fabric; check recovery after the first wash |
| Canvas, twill and backpack fabrics | Tight weave needs firm, even pressure across the whole label |
| Mesh and open knits | Adhesive can strike through to the inside; the backing choice matters more here |
| Product type | TPU heat transfer label |
| Item reference | TPU-2# |
| Main material | Thermoplastic polyurethane (TPU) |
| Craft | High-frequency moulding, heat transfer application |
| Logo treatment | Embossed, engraved or printed |
| Relief | Raised 3D logo, depth set at sampling |
| Colour | Matched to your submitted reference |
| Design source | Your artwork file |
| Backing | Hot-melt adhesive, self-adhesive or stitch-on |
| Equipment | High-frequency (HF) heat transfer presses |
| Material standard | Raw materials meet EURO Reach (2023) |
| Test documentation | SGS SVHC screening on TPU patch, February 2023 |

TWINGS INDUSTRIAL CO.,LTD is a manufacturer rather than a trading office: the trim components we sell are produced and shipped factory-direct, so your order is quoted, sampled and made by the same team. Every job starts from your artwork and logo — we build a sample for your approval, then run bulk to that approved standard so colour, surface detail and hand feel stay consistent from the first piece to the last carton. Tell us your target quantity and delivery window and we will confirm what we can commit to.
Yes. Nothing is pulled from a stock range: the logo, lettering, outline and colours are built from the file you send, and colour is matched to the reference you give us, whether that is a Pantone number, a physical swatch or a label from an earlier run. We come back with a proof and a physical sample so you can check the mark against the garment fabric before production, and the relief depth is agreed at that same stage. Everything in our custom label printing work starts from your artwork.
All raw materials we use meet the latest EURO Reach standards as of 2023. A TPU patch sample has also been screened by SGS for SVHC substances with a pass result, and that testing covers California Proposition 65 screening for the US market as well. As a custom label manufacturer we keep current copies on file, so ask your sales contact for the version your compliance team needs to hold.
With heat and pressure. The hot-melt backing softens under the press and fuses the TPU to the fabric, so the badge becomes part of the surface rather than a layer stitched on top. Because they are bonded rather than sewn, custom labels for clothing can sit on curved panels, cuffs and pocket edges where a stitched patch would pucker. The working settings depend on the shell and your press, so we agree a starting point and your team confirms it on a trial garment before the run, and stitch-on builds are available where a press cannot be used.
They are built for high-frequency heat transfer equipment, which is the same kit used for silicone heat transfer labels, so there is normally no new machinery to buy and no change to the line layout. What does change is the setting for each fabric and construction, and we agree that starting point with you. Tell us your press type and the shells you run, and we will confirm compatibility before you commit to a placement.
Yes, and it is often the better-looking option. A single badge can carry a raised logo over a flat printed background, a printed strapline under an embossed mark, or engraved detail filled with colour. Custom printed labels of this kind are set up in the same moulding and finishing sequence, so you are not juggling two suppliers or two schedules. Tell us which part of the mark should stand up and which should stay flat, and the proof will show exactly that.
The outline follows your artwork: circles, rounded rectangles, shapes cut around the logo, or a small set of pieces applied together to build one mark. Size is driven by the placement rather than by a fixed range, so measure the area you want to cover on the garment and we will confirm what fits there and how the relief reads at that scale. These are custom designed labels, which means the drawing you approve is the drawing we cut to.
The TPU and its adhesive base are chosen for resistance to washing and abrasion, and the embossed detail is moulded into the material rather than printed on the surface, so it keeps its depth over the life of the garment. Industrial laundry is harder on any bonded trim than home washing, so run one production garment through the wash programme your customer actually uses before the bulk run. If the shell or the cycle is unusual, send us the details and we will advise on backing and relief. Custom garment labels for workwear and uniform programmes are usually specified this way: trial first, then bulk.
That is exactly what the approved sample is for. The mould, the colour mix and the cutting are held for the design, so a reorder is produced against the reference you signed off rather than re-matched from a photograph or a memory of the shade. Wholesale label printing programmes that run across several drops usually keep one approved sample per design with us for this reason, and it is worth naming the reference on every reorder so the right one is pulled.