Every zip on a backpack, jacket, suitcase or purse ends in something a hand has to find without looking. These custom silicone & PVC zipper pulls are moulded from your drawing and colour reference in silicone, PU, TPR or PVC, so the outline, the logo, the emboss depth and the surface all come from your file instead of from a stock shape. Length, thickness and edge are set against the slider and against the item the pull hangs on: a tab on a purse stays slim and light, a tab on a case is built deeper so a gloved hand can catch it, and a tab on a jacket has to lie flat without pressing into the chest.
The pulls come off the same moulding line as the badges and labels we make for the rest of a style. As a PVC patch manufacturer we already run the tooling, colour references and finishing that a trim set needs, so a pull, a moulded badge and a garment label for one collection can be produced to a single approved colour and a single approved standard rather than being matched across three suppliers.
| Effect | What it looks like | Where it works |
| 2D emboss | The logo rises to one even height with a clean edge — the same edge we cut on custom PVC patches | Fine type, thin rules and small marks |
| 3D emboss | A contoured face that catches light along its edge, cut at the depth we use for 3D PVC patches | Simple, bold shapes that must read at arm's length |
| Engraved | The mark sits below the surface in tone-on-tone, leaving a smooth face for the thumb | Quiet signatures and tabs that are gripped hard |
| Printed | Colour sits on the surface, so multicolour and gradient artwork is possible | Logos that are looked at more than handled |
| Matt finish | Diffuses light and hides the small scuffs a pull collects in a pocket | Silicone and TPR tabs in daily use |
| Shiny finish | A clean highlight along the emboss and a sharper edge | PU and PVC tabs on purses and handbags |
| Document | Detail |
| Raw material standard | Latest EURO Reach standard (2023) |
| Nickel | Nickel-free across the range |
| Silicone report | SGS SVHC test report on a silicone rubber sample, the same compound we use for custom silicone patches |
| TPR report | SGS test report on a TPR badge sample |
| Heavy metals | Lead content testing |
| Plasticisers | Phthalate content testing |
| SVHC screening | Run against the candidate list in force on the test date |
| Sample reference | Each report names the sample it was run on |
| Coverage | Silicone and TPR submitted as separate samples, not one grouped test |
| Format | Laboratory PDF showing method, sample reference and issue date |
| Currency | Issue date printed on the report so your compliance file can check it |
| Sharing | Reports passed to your compliance team on request |

Outline. Round, rectangle and square cover most requests, but the mould follows your drawing, so an asymmetric tab or a shaped cut-out is ordinary work. A round tab rolls between thumb and finger and suits a slider pulled straight; a rectangle gives a long face for a wordmark; a square holds a compact emblem.
Length and thickness. Length runs from the slider to the tip. A longer tab is easier to find on a suitcase or a backpack, but it swings and catches; a shorter one sits tight against a purse. Thickness follows the compound and how much grip the face needs, and the relief has to hold at the size the tab is actually seen — the same check we make on 3D PVC patches before a mould is cut.
Edge rounding. Every edge is rounded. A sharp moulded edge catches on zip tape, pocket lining and knitwear, and it is the first place to show a pale line once the material has been stressed.
Grip face. A slightly dished or textured face gives the thumb something to push against, which matters with gloves on, with wet hands, and on tabs finished gloss.
Weight and leverage. A tab too heavy for a light shell drags the zip open when the jacket hangs on a chair, and a tab too large for a small slider puts leverage on the slider body. Both are settled at the sample stage by changing the compound or the thickness rather than by shrinking the logo.
- Lock types. Non-lock, auto-lock and lock sliders are all matched. An auto-lock slider holds its position until the tab is pulled and locks again on release; a non-lock slider runs free, so the tab becomes the only grip the hand has. - Mounting. The tab is a button-on badge that pushes over the slider eye and swings clear of the zip tape. It is a single fitting step, and nothing is stitched or riveted into the tape itself. - Weight on the slider. A long, heavy tab on a small slider puts leverage where the slider body is thinnest. Tell us the slider you are using and the tab is sized to suit it rather than to a catalogue average. - Metal parts. Nickel-free is standard across the range, and the moulded tab itself carries no metal at all.

| Item | What the tab has to do | What we adjust |
|---|---|---|
| Backpack | Be findable by feel when the pack is on your back or hung in a crowd | Wider face, deeper emboss, silicone or TPR |
| Jacket | Lie flat against the zip without pressing into the chest | Slimmer body, lighter weight, PU or silicone |
| Luggage | Be gripped with gloves and keep the zip shut in transit | Longer tab, auto-lock slider, bold 3D mark |
| Purse or handbag | Read as visible hardware rather than an added part | Crisp edge, controlled gloss, PU or PVC |
| Trim set with custom PVC patches | Sit on the same colour as the badge and label it travels with | One approved colour reference held across the parts |

| Property | Detail |
|---|---|
| Product type | Moulded zipper pull and zipper tab |
| Compounds | Silicone, PU, TPR, PVC, TPU |
| Logo methods | 2D emboss, 3D emboss, engraving, printing |
| Surface finish | Matt or shiny |
| Outline | Round, rectangle, square, or a cut shape from your drawing |
| Slider match | Non-lock, auto-lock, lock |
| Mounting | Button-on badge |
| Colour | Matched to your artwork or a physical swatch |
| Nickel | Nickel-free |
| Moulding | Micro injection |
| Model reference | TW003 |
A pull rarely travels alone. Where the style also carries custom PVC patches on a pocket or sleeve, send one colour reference for the whole set and we hold it across the parts, so the pull is matched to the same approved swatch as the badge and the garment label.
The same reference covers custom silicone patches, so a moulded badge on the chest and the pull on the zip are not two separate colour decisions. The approved colour and emboss depth are recorded against your standard, and repeat orders are checked against that record rather than re-matched from a photograph of the first run.
Where a range covers a tote, a purse and a wash bag, keeping one outline and one finish across all three makes them read as a family instead of as three unrelated trims.
TWINGS INDUSTRIAL CO.,LTD is a manufacturer rather than a trading office: the trim components we sell are produced and shipped factory-direct, so your order is quoted, sampled and made by the same team. Every job starts from your artwork and logo — we build a sample for your approval, then run bulk to that approved standard so colour, surface detail and hand feel stay consistent from the first piece to the last carton. Tell us your target quantity and delivery window and we will confirm what we can commit to.
All three slider types are matched. An auto-lock slider holds its position until the tab is pulled and locks again on release; a non-lock slider runs free, so the tab becomes the only grip; a lock slider is released by a separate pull on the body. The tab is a button-on badge that pushes over the slider eye, so tell us which slider the bag or jacket uses and the opening, tab weight and mounting are set around it. Nothing is stitched or riveted into the zip tape.
A 2D emboss holds thin strokes and small type well, because the mark rises to one even height with no contour to soften it. Hairlines below what the tool can cut are thickened very slightly — the same adjustment we make on 3D PVC patches — and any change is flagged before a mould is cut. Gradient or multicolour artwork is better printed than moulded. Send outlined vector artwork and we will tell you which parts of the logo will hold at the tab's size.
Nickel-free is standard, and the moulded tab itself carries no metal — the nickel question usually concerns the slider and the rivets, which are separate parts. Raw materials are selected to the latest EURO Reach standard (2023), and we hold an SGS SVHC report on a silicone rubber sample, an SGS report on a TPR badge sample, plus lead and phthalate content testing. Each report names the sample it was run on and carries an issue date, so your compliance file can check how current it is.
Yes — one colour reference covers the set. Send a swatch or a reference for the body colour and the logo colour, and the pull is matched to the same approved standard as the custom PVC patches and labels going on that style. The reference is recorded with your approved standard, so a repeat order is checked against the record rather than re-matched from a photograph.
Outlined vector artwork — AI, EPS, PDF or SVG — plus a colour reference or a physical swatch, because a mould is cut from the outline and a photograph cannot be worked from. As a PVC patch manufacturer we check each file against the moulding process first and come back on draft angles, minimum strokes and the smallest text the tool can hold before anything is cut. A photo of the current zip, or the slider itself, settles the mounting and the tab weight at the same time.