A heat transfer TPU label puts your logo onto a garment as a soft, flexible film instead of a stitched-on badge. We build custom logo labels to your artwork — outline, size, colour and logo detail — and weld the relief with high-frequency (HF) craft, which gives clean cut edges and keeps fine lines readable at the size you order. On the line the label is positioned on the fabric and bonded with a heat press, so the branding goes on in seconds without the weight, bulk or scratchy reverse of a sewn badge. The same construction covers transfer patches: a shaped logo piece cut to your outline and finished exactly like a rectangular label, with the only difference being the outline you draw. That makes it useful when the brand mark itself is the shape — a wing, a letterform, a mascot silhouette — because the film follows the fabric rather than standing proud of it, so the logo stays flat across the panel and the garment keeps its drape after washing. We are a patch manufacturer working from your file, not from a catalogue of stock shapes, so the first step is artwork and a colour reference we can match. From there we produce a sample for you to press on your own fabric and approve, and bulk runs to that approved standard — same film, same relief, same colour. If the season also calls for woven labels, hang tags or zipper pulls, tell us at the start so the whole trim set can be planned on one schedule.

Chest and centre front. The main brand mark on tees, hoodies and jerseys. A pressed label sits flush with the panel, so the logo reads cleanly on lightweight jersey and on heavier loopback without the fabric pulling around a stitch line — which is why so many custom garment labels end up here.
Sleeve and cuff. Small marks near a seam edge, where a stitched badge would add stiffness exactly where the arm bends. There is no bulk to catch on a jacket sleeve or a bag strap.
Inside neck. The classic swap. A soft custom logo label pressed at the inside neck replaces a woven tag that scratches, and because the film is thin and sealed at the edge there is nothing to fray against skin.
Leggings, base layers and performance kit. Stretch fabric is where a heat transfer earns its place: the film moves with the panel instead of cracking along a row of stitches. Press a test piece on the actual fabric before the run, because a high-stretch or coated surface behaves very differently from cotton jersey.
Headwear, bags and footwear. The same construction works wherever a logo has to sit on a flat or gently curved panel, from cap fronts to shoe tongues.
Club kit, uniforms and private label. Gyms, teams and private-label brands building custom patches for a whole kit can run one artwork across several placements and keep the colour consistent across the set.
| Item reference | TPU-01# |
| Product type | Heat transfer TPU label and brand patch |
| Base material | TPU film with high-frequency (HF) craft |
| Logo routes | Printed, embossed or engraved |
| Relief | Flat print, raised emboss, or recessed engrave |
| Colours | Built to your colour reference |
| Design | Made to your artwork file — shape, size and layout |
| Backing | Hot-melt adhesive, self-adhesive or stitch-on |
| Application | Heat press onto the garment, or sewn when supplied stitch-on |
| Compliance | Raw material screened against the EURO REACH SVHC candidate list; SGS report issued February 2023 |
| OEM / ODM | Available |
| Hand feel | Soft, low-profile film that moves with the fabric |

TWINGS INDUSTRIAL CO.,LTD is a manufacturer rather than a trading office: the trim components we sell are produced and shipped factory-direct, so your order is quoted, sampled and made by the same team. Every job starts from your artwork and logo — we build a sample for your approval, then run bulk to that approved standard so colour, surface detail and hand feel stay consistent from the first piece to the last carton. Tell us your target quantity and delivery window and we will confirm what we can commit to.
Yes. Send the garment, a clear photograph of it, or the original artwork file, and we will work from that as the reference. Colour is matched to a Pantone number or a physical swatch you already approve against, and the match is confirmed on the sample before anything is pressed in bulk. This is common when a brand refreshes a trim package but wants the custom logo labels to stay recognisable.
It is one of the most common placements. The film is thin and its edge is sealed by the HF process, so there is nothing to fray or scratch at the inside neck. Press a test piece on the actual fabric first — a neckline on a light tee and one on a heavy hoodie are different surfaces, and a weight that suits one may feel firm on the other. If your customer prefers a sewn-in finish, ask for the stitch-on version of the same custom garment labels.
Yes, and it is often the preferred answer for a small mark. A raised outline holds the shape while colour is printed into the recess, so the logo reads at a glance and still has a tactile edge. Combining the two also makes placement more consistent on the line, because the relief gives the operator something to line up each time. This is the usual request for custom printed labels where the artwork has one strong shape and one supporting colour.
Yes. The same design can be run with hot-melt adhesive, self-adhesive or as a stitch-on version, and repeat orders are quoted against your approved sample. Tell us at quotation which backing the new run needs, because it changes both how the transfer patches are packed and how your factory applies them.
The emboss is formed in the film itself rather than applied on top of it, so the raised area is the material and not a coating. Under normal garment washing and wear the definition holds. What changes a relief most is heat applied carelessly at the press, which is why the settings are settled on the sample and a test piece before the run — embossed patches on a stretch panel should always be pressed on scrap first.
A sticker sits on the surface; a heat transfer bonds into it. Once the label is pressed, only the artwork remains — the film softens into the fabric, so there is no adhesive edge to lift and nothing standing proud of the panel. In practice that is what buyers who start out asking for logo transfer stickers are after: a mark that looks printed into the garment rather than added to it.
We work from yours. As a patch manufacturer we build the sample to your file, so the shape, proportions and colour reference come from your brand rather than from a template. Send vector artwork where you have it and describe the placement — chest, sleeve, neck or hem — so the size is judged in context. If all you have is a photograph of an existing label, we can start from that and confirm the drawing with you before sampling.
Yes — any outline you can draw can be cut. Custom patches in a letterform, a mascot or a badge silhouette are made the same way as a plain rectangle, and shaped outlines are where the HF edge matters most, because the corners and curves have to hold their definition after pressing. Keep fine points and very narrow bridges in mind: a shape with a long thin spike is harder to keep intact through a wash than a compact one, so send the artwork early and we will tell you what will hold.